欧洲经委会（ECE）汽车标准法规： R12-03S-3S-C3.pdfVIP

E/ECE/324 E/ECE/TRANS/505 } 11Add./Rev.3/Corr.3 23 April 2010 AGREEMENT CONCERNING THE ADOPTION OF UNIFORM TECHNICAL PRESCRIPTIONS FOR WHEELED VEHICLES, EQUIPMENT AND PARTS WHICH CAN BE FITTED AND/OR BE USED ON WHEELED VEHICLES AND THE CONDITIONS FOR RECIPROCAL RECOGNITION OF APPROVALS GRANTED ON THE BASIS OF THESE PRESCRIPTIONS ∗∗/ ∗∗ (Revision 2, including the amendments which entered into force on 16 October 1995) _________ Addendum 11: Regulation No. 12 Revision 3 - Corrigendum 3 Corrigendum 3 to Revision 3, subject of Depositary Notification C.N.131.2010.TREATIES-1 dated 3 March 2010 UNIFORM PROVISIONS CONCERNING THE APPROVAL OF VEHICLES WITH REGARD TO THE PROTECTION OF THE DRIVER AGAINST THE STEERING MECHANISM IN THE EVENT OF IMPACT _________ UNITED NATIONS ∗/ Former title of the Agreement: Agreement Concerning the Adoption of Uniform Conditions of Approval and Reciprocal Recognition of Approval for Motor Vehicle Equipment and Parts, done at Geneva on 20 March 1958. GE.10- E/ECE/324 E/ECE/TRANS/505 } Add.11/Rev.3/Corr.3 Regulation No.12 page 2 Paragraph 5.4.1., amend to read: 5.4.1. Before the impact test prescribed in paragraphs 5.2. and 5.3. above no part of the steering control surface, directed towards the driver, which can be contacted by a sphere of 165 mm in diameter shall present any ro