bsiec60300312003可靠性管理：第31部分：应用指南—可靠性分析技术—方法指南.doc

BRITISH STANDARD BS EN 60300-3-1:2004 Incorporating Amendment No. 1 to BS IEC 60300-3-1:2003 (renumbers the BS IEC as BS EN Dependability 60300-3-1:2004) management — Part 3-1: Application guide — Analysis techniques for dependability — Guide on methodology The European Standard EN 60300-3-1:2004 has the status of a British Standard ICS 03.120.30; 21.020   BS EN 60300-3-1:2004 National foreword This British Standard is the official English language version of EN 60300-3-1:2004. It is identical with IEC 60300-3-1:2003. The UK participation in its preparation was entrusted to Technical Committee DS/1, Dependability and terotechnology, which has the responsibility to: — aid enquirers to understand the text; — present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; — monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 57, two Annex ZA pages and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date Comments 15370 29 September 2004 Implementation of the European Sta