ANSYS Simplorer软件介绍与整流电路搭建.pdfVIP

ANSYS Simplorer软件介绍与整流 电路搭建 太 李岩冰 亚 世 安 出品 | Simplorer’s Basic Flow Using 3 phase Rectifier 2 • Invoke Simplorer, note a default project and design are inserted. 太 • Rename the project and design to be “Rectifier” and “Design1” 亚 respectively by selecting each, then RMB - Rename. Note when a change 世 is made to a project or design, a “ * “ will appear showing that something has changed. If the changes are to be kept, must do a save 安 (see below). 出品 | Placing Components in Schematic 3 • The following circuit will be now be created 太 亚 • Go to the “Component Manager” window on the left of the Simplorer window to access the component libraries 世 • Expand the folders to place the following components on the schematic. Simply drag 安 and drop them into the schematic (use “Esc” to get out of insert mode) • Voltage source: Basic Elements/Circuit/Sources/E (3) • Resistor: Basic Elements/Circuit/Passive Elements/R (1) • Capacitor: Basic Elements/Circuit/Passive Elements/C (1) • System Diodes: Basic Elements/Circuit/Semiconductor System/D (6) • Use (Ctrl + G) to place ground node 出品 | Define Net Names and Display 4 • Arrange the components and wire them together as shown below. Name the net for the DC output to be “Vdc_out” by double clicking on th