24C64 EEPROM读写的C语言程序.docVIP

/* 24C64子程序 */bit?? I2C_Start(void);void? I2C_Stop(void);void? I2C_Ack(void);void? I2C_Nack(void);bit?? I2C_Send_Byte( uchar);uchar I2C_Receive_Byte(void);void? AT24C64_R(void *mcu_address,uint AT24C64_address,uint count);void? AT24C64_W(void *mcu_address,uint AT24C64_address,uint count);void? Delay_10_uS(void){?char i=10;?while(i--);}void Delay_N_mS( uint n_milisecond)? /* n mS delay */{?uchar i;?while(n_milisecond--)?{? i=37;? while(i--);?}}bit I2C_Start(void){ /*启动I2C总线的函数，当SCL（SCK）为高电平时使SDA产生一个负跳变*/?Delay_10_uS();?I2C_SDA =1;?Delay_10_uS();?I2C_SCK =1;?Delay_1