AnsysMFX双向多物理场求解流程.pdfVIP

ANSYS MFX双向多物理场求解流程 ANSYS MFX双向多物理场求解流程 Multiphysics Simulation with ANSYS Multiphysics Simulation with ANSYS ANSYS, Inc. Proprietary September 17, 2008 © 2008 ANSYS, Inc. All rights reserved. 10-1 Inventory #002528 Multiphysics Simulation with ANSYS MFX Procedure Training Manual • MFX analyses are set-up and executed using the WB environment – WB Simulation used to • create ANSYS field model • identify ANSYS field interfaces • create initial ANSYS file – CFX-PRE used to • create CFX field model • specify MFX settings • identify CFX field interfaces – CFX Solver Manager used to • create final ANSYS input file • launch solvers and initiate MFX analysis – CFX-POST used to • post-process both ANSYS and CFX field results ANSYS, Inc. Proprietary September 17, 2008 © 2008 ANSYS, Inc. All rights reserved. 10-2 Inventory #002528 Multiphysics Simulation with ANSYS MFX Procedure (cont) Training Manual • MFX procedure – create solid model that represents both ANSYS and CFX domains • generally done using WB Design Modeler – import solid model into WB Simulation • From within WB Simulation – create complete ANSYS field model – define all field interfaces – write initial ANSYS input file • contains commands for ANSY