液压系统PLC控制[收集].docxVIP

体系常识汇编 Compilation of system knowledge 20XX 天津工业大学 毕业规划（论文） 标题：揉捏机液压体系及PLC操控 姓 名 朱永生 学 院 机械电子学院 专 业 机械工程及主动化 班 级 机自S071班 学 号 0750310107 辅导教师 肖放 王恩鸿 职 称 教授 2009年6月18日 摘 要 本文首要介绍了揉捏机的现状，揉捏机液压体系的作业原理、特色，从规划视点动身剖析液压体系各个元件的特色、作业条件，依据核算经过对电控阀、流量操控阀、压力操控阀等元件的挑选规划联接液压回路，构成液压的传动体系；依据液压体系的传动特色规划电气接线图，剖析在电气操控与液压体系的主动、手动操控办法、开闭环特色，运用原理剖析、核算找出或许呈现的操控问题，编写PLC梯形图程序，终究由PLC程序操控液压体系构成一个一致的操控体系全体，到达运用主动化手操控液压体系完结特定的作业行程的意图。 要害词： 液压体系 PLC操控 揉捏机 Abstract This paper introduces the present situation of extruder, the working principle and the characteristics of hydraulic system, , from the design point of view of analysis the various components of hydraulic system characteristics, working conditions, according to the calculation of electric control valves, flow control valves, pressure control valves, such as the choice of components designed to connect the hydraulic circuit to forming the hydraulic drive system; the transmission hydraulic system in accordance with the characteristics of the design of electrical wiring diagram, analysis in the electrical control and hydraulic system of automatic, manual control mode, the closed-loop characteristics.Use of the principle to analysis and computation the control to identify possible problems and the preparation of PLC ladder program, ultimately form the PLC control hydraulic system to control the formation, achieved the popuse of automated hand-controlled hydraulic system to complete the work of a particular trip. Keywords：PLC 、Order control、 Hydraalic system 目 录 摘要 ABSTRACT 榜首章 序言………………………………………………………………………1 1.1液压传动与操控概述………………………………………………………………………1 1.2 液压机的开展及工艺特色 ………………………………………………………………1 1.3 PLC的国内外………………………………………………………………………………2 1.4 PLC的特色…………………………………………………………………………………3 第二章 清晰规划要求进行工况剖析……………………………………………4 2.1运动剖析……………………………………………………………………………………4 2.2 动力剖析……………………………………………………………………………………5 第三章 确认液压体系首要参数 …………………………………………………10 3.1液压缸的规划核算…………………………………………………………………………10 3.2液压马达的规划核算………………………………………………………………………11 第四章 液压元件的挑选 ……………………………………