侧弯支座冷冲模设计.docxVIP

侧弯支座冲压模具的设计摘要 这次毕业设计我设计的工件是侧弯支座冲压模具的设计。侧弯支座材料为 厶刃2M （高强度硬铝），厚度为1加加,这种材料力学性能好，适合冲压。侧弯支座结 构并不复杂。但是成型的工艺较为复杂，其小有5个冲裁工序，4弯曲工序和1 个切断工序，工序多，结构紧凑，适合设计成级进冲压模。级进模又叫做连续模, 可以简单的解释成在一次压力行程内，完成几个工序不同位置的冲压模。和一般 的单工序模具相比，其结构较为复杂，模具的各部件制作难度大，精度要求高， 制作周期长，因此对模具设计人员和工艺人员的要求也较高。冲压工艺在现在化 的生产中被广泛的应用。各行各业的发展都和冲压有着或多或少的关系，特别是 进入21世界以后，随着CAM/CAD和三维绘图软件的应用，冲压工业的发展进入 了快车道，它的发展的水平更是衡量一个制造业水准的重要指标Z-o 关键词：侧弯支座，冲压，落料，弯曲，级进模 Design of stamping die for side bending bearingABSTRACT This graduation project I design is the side bending bearing stamping die design, the lateral bending bearing material is L Y12M (high strength hard aluminum), the thickness is 1mm, this kind of material mechanical performance is good, suits the stamping. The structure of the side bending bearing is not complicated, but the forming process is complicated, of which there are 5 punching processes, 4 bending processes and 1 cutting procedures, with many working procedures and compact structure, so it is suitable for designing into progressive stamping dies. Progressive die, also called continuous die, can be understood as a stamping die with different positions in several processes in a single pressure stroke. Compared with the single operation die in general, its structure is more complex, various components of mold making dijficult, high precision, long production cycle, so the mold design and technology personnel requirements are higher, need to have profound professional knowledge and rich practical experience, support. The stamping process in the production is widely used, the development of all walks of life and stamping has more or less, especially after entering the 21 world, with the application of CAM/CAD and 3D software, development of stamping industry into the fast lane, its development level is an important indicator to measure a manufacturing industry standard. KEY WORDS: Side bent bearing / Stamping, Blanking / Bend/ Progressive die TOC \o 1-5 \h \z 前言 1 \o Current Document 第1章工艺性分析及工艺方案的确定 2 \o Curre