SULZER喷射器产品手册.pdf

Sulzer ejector for priming There are many ways to pump the liquid from a sump. Now you can choose the process pump with the highest efficiency and best performance for your application and prime the suction pipe and pump with a Sulzer ejector. Ejectors can be installed for all standard process pumps, both as retrofits for existing Save energy while reducing your total cost installations and for new installations. It offers an easy of ownership (TCO) solution for enabling fast, reliable and fully automated • Pressurized air is required only during priming priming. • The ejector consumes no energy during normal pumping sequence Easy to install and use • The robust and simple design minimizes installation, • Because the ejector and valves with actuators are maintenance and operating costs installed to the piping, no additional modification to the pump is required Improved reliability • The ejector requires pressurized air (4 - 10 bar) • Automated priming for priming, and electricity is necessary for the • Easy to use automated valves • Service-free with no rotating parts • Either a local control box or a mill automation system • Manufactured in superior Duplex A890 Grade 3A can be used to control the ejector material to ensure application versatility Delivery scope 2 For fully automated priming, the Sulzer ejector package includes: 1 1 Sulzer ejector unit 2 Valves with actuators for motive air 2 and ejector suction