超声波清洗方案副本－英文(1)(1).pptxVIP

Ultrasonic cleaning technical solutionsOverturning and travelling plate（speed as 25m/min）Put the parts on the conveyor belt (upper) and transmittal, then the mechanical gripper will take it to lean, until finish the cleaning the mechanical gripper will take the part back on the overturning, and move it to the conveyor belt (lower). Conveyor belt (lower)（speed as 10m/min）Conveyor belt (upper)When the part which finish cleaning on the conveyor belt (lower), the belt will take the part into the drying station for drying, after that the parts will be moved to the export by conveyor belt (lower)?Drying Station Ultrasonic cleaning station include dust clean part, besmirch clean part and surface clean part. (Note: Because without any detection, the ultrasonic power can not be provided)Equipment component1. Conveyor belt (upper and lower)The material of the belt is nylon, and there has some oriented plate for keeping the part’s position.2. Mechanical gripperIt’s possible to overturn and elastic, and the angle is 180°3. Ultrasonic cleaning station4. Drying stationMechanical gripper (possible to overturn and elastic) ( Note: the gripper is used for all tools )Equipment component No. Name ModeQTYmanufacturer 1Conveyor belt (upper and lower)Made as standard3MChina2Touch Screen 1China3The motor for mechanical gripper to level move400W1China4The motor for mechanical gripper to move up and down400W1China5The motor for mechanical gripper to overturn400W1China6The motor for conveyor belt 400W1China7Ultrasonic cleaning stationMade as standard1China8Clean solution SR-820fiii 9The pedestal of the equipment Made as standard1China