珠海市香洲第一小学教学楼设计.docVIP

珠海市香洲区第一小学教学楼设计 摘 要 本设计是珠海市香洲区第一小学教学楼的设计，结构的设计类型用采的是双层的现浇钢筋混凝土框架结构，总建筑高度为（女儿墙高），底层高度为，室内外高差为，纵向长度为，横向长度为，没有地下室，取横向一榀框架做结构设计。本设计是根据导师所给的任务书来对珠海市香洲区第一小学的教学楼进行设计的，通过查阅国家的相关规范、图集等资料、查阅其他钢筋混凝土框架结构的教学楼的设计资料、整理专业课程的相关专业知识和使用包括、天正建筑、、等软件来完成本设计。完成建筑设计、结构选型、材料选择、荷载计算、内力计算、内力组合和配筋计算等过程。 关键词：钢筋混凝土框架结构；荷载及内力计算；内力组合；结构设计 Teaching building design of the first primary school in Xiangzhou District, Zhuhai Abstract This design is the building teaching building design of the first primary school in Xiangzhou District, Zhuhai. The structural design type adopts double-layer cast-in-place reinforced concrete frame structure, with a total building height of 8.5m (parapet height of 0.9m), a bottom height of 0.4m, an indoor and outdoor height difference of 0.45M, a longitudinal length of 42m, a transverse length of 14.8m, and no basement. A transverse frame is taken as the structural design. This design is to design the teaching building of the first primary school in Xiangzhou District, Zhuhai City according to the task book given by the tutor. The design is completed by consulting the relevant national specifications, Atlas and other materials, consulting the design materials of other reinforced concrete frame structure teaching buildings, sorting out the relevant professional knowledge and use of professional courses, including AutoCAD, Tangent TArch2014, PKPM, WPS Office and other software. Complete the process of architectural design, structural selection, material selection, load calculation, internal force calculation, internal force combination and reinforcement calculation. Keywords: Reinforced concrete frame structure; Load and internal force calculation; Internal force combination; Structural design 目录 TOC \o 1-3 \h \u 29875 1 前言 3 8169 2计算书 3 1611 2.1工程概况 3 328 2.2设计资料 3 4948 2.2.1工