BSEN1011-7-2004焊接焊接金属材料的推荐第7部分：电流焊接.docx

BS EN BS EN 1011-7:2004 BS EN BS EN 1011-7:2004 BRITISH STANDARD Welding 一 Recommendations for welding of metallic materials 一 Part 7: Electron beam welding 焊接一一焊接金属材料的推荐 第7部分：电流焊接 The European Standard EN 1011-7:2004 has the status of a British Standard ICS 25.160.10 ritish Standards ritish Standards NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BS EN 1011-7:2004 BS EN 1011-7:2004 BS EN 1011-7:2004 BS EN 1011-7:2004 National foreword This British Standard is the official English language version of EN 1011-7:2004. The UK participation in its preparation was entrusted to Technical Committee WEE/-/1, Briefing committee for welding, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; 一 monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled International Standards Correspondence Index； or by using the Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 41 and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication This British Standard was published under the authority of the Standards Policy and Strategy Co