年产2万吨药用氯化钠蒸发干燥系统工艺设计.docxVIP

年产2万吨药用氯化钠蒸发干燥系统工艺设计 院： 级： 名： 摘要 药用氯化钠是当今医学专业必不可少的一项原料药品，也是许多 行业的基础用药。本次设计通过调研大量文献研究，设计了年产20000 吨药用氯化钠蒸发干燥系统工艺，采用的是四效真空蒸发外加强热制 循环，离心脱水流化床干燥器进行干燥。本文简单介绍了药用氯化钠 的基本性质和作用、生产工艺以及其国内外市场需求状况。主要介绍 药用氯化钠蒸发干燥系统，包括此工段流程设计、主要装置设备介绍、 主设备的工艺尺寸计算——物料衡算和热量衡算以及辅助设备的选 型计算等。 本设计对药用氯化钠蒸发干燥系统进行深入研究，此过程需要不 断的进行分析、计算、核算，最终确定并绘制药用氯化钠蒸发干燥系 统的工艺流程图和主要设备简图。通过设计计算得到了药用氯化钠蒸 发干燥系统的基本尺寸数据，其工艺流程合理，具有操作稳定的特点， 符合条件，在化工生产过程中是可以执行的。 关键词： 药用氯化钠 真空蒸发循环 脱水干燥 Process Design of the Evaporative Drying System with an annual output of 20,000 Tonsof medicinal Sodium Chloride ABSTRACT Medicinal sodium chloride is an essential raw material medicine in todays medical profession, as well as the basic medicine in many industries. This graduation project through the investigation of a large number of literature research, designed an annual output of 20,000 tons of pharmaceutical sodium chloride evaporative drying system process, the use of four effect vacuum evaporation to strengthen the thermal system cycle, centrifugal dehydration fluidized bed dryer for drying. This paper briefly introduces the basic properties and functions of medicinal sodium chloride, its production technology and its market demand at home and abroad. This paper mainly introduces the evaporative drying system of medicinal sodium chloride, including the process design of this section, the introduction of the main equipment, the calculation of the size of the main equipment ― material balance and heat balance, and the selection of auxiliary equipment. The design of the pharmaceutical sodium chloride evaporative drying system for in-depth research, this process needs to continue to analyze, calculate, accounting, and finally determine and draw the pharmaceutical sodium chloride evaporative drying system process flow chart and the main equipment diagram. With the help of textbooks related to our major, such as nPrinciples of Chemical Engineeringn two volumes and so on to carry out in-depth development. Through the design and calculation, the b