omniscan6-波束形成基础.pdfVIP

OmniScan MX2 Training Program OmniScan MX2 培训 Beam Forming Basics 波束形成基础 OmniScan MX2 Training – Beam Forming Overview OmniScan MX2培训——波束形成概述  After populating the focal law calculator with the parameters of the probe, wedge, and material velocity, the software can be configured for the beam formation. This is the purpose of the focal law calculator. Also called group creation wizard in the OmniScan MX2 software.  将探头、楔块和材料波速的参数填入聚焦法则计算器后，软件可对波束形成进行配置。这是聚焦法则计 算器的目的，在OmniScan MX2也被称为组创建向导。  The OmniScan MX2 has a built in group set up wizard that will walk the user step by step through the group creation process populating the probe, wedge, and material parameters before beam formation. OmniScan MX2在组设置向导中有一个构造，将在波束构造前指导用户一步一步通过组创建程序填入探 头、楔块和材料参数。  Beam formation or focal law generation will determine the size, shape, and angles of our sound beams. (A-scans).  波束构造或聚焦法则生成将决定我们的声束（A-扫描）的尺寸、形状和角度  Beam formation includes both angle steering and beam focus combined together for an array of A-scans in a group.  波束构造包括一组中A-扫描的1个阵列结合 在一起的角度转向和声束聚焦。 2 OmniScan MX2 Training – Beam Forming Overview cont. OmniScan MX2培训——波束形成概述  Groups of A-scans or focal laws come in many configurations as a function of software calculators, instrument capability, and probe capability.  A-扫描或聚焦法则的组可根据软件计算器 的功能、仪器性能和探头性能用于许多配 置。 固定角线性扫描 标准束线性扫描  The OmniScan MX2 refers to beam sets 折射压缩S-扫描 as “Groups” and directly supports sector and linear scan groups in the software.  OmniScan MX2定义波束设置为“组”并在 软件中直接支持扇形和线性扫描组。  Other types of groups can be imported 折射剪切S-扫描 多深度扫描 into the OmniScan MX2 from an external focal law calculator.  其他类型的组可通过外部聚焦法则计算器