华为AC6005配置实例.pdfVIP

华为无线控制器AC6005 配置（直接转发） • • • Switch的配置文件 • # • sysname Switch • # • vlan batch 100 to 101 • # • interface GigabitEthernet0/0/1 • port link-type trunk • port trunk pvid vlan 100 • port trunk allow-pass vlan 100 to 101 • port-isolate enable group 1 • # • interface GigabitEthernet0/0/2 • port link-type trunk • port trunk allow-pass vlan 100 to 101 • # retur • Router的配置文件 • # • sysname Router • # • vlan batch 101 • # • interface Vlanif101 • ip address 10.23.101.2 255.255.255.0 • # • interface GigabitEthernet1/0/0 • port link-type trunk • port trunk allow-pass vlan 101 • # • retur • AC的配置文件 • # • sysname AC • # • vlan batch 100 to 101 • # • dhcp enable • # 精选 • interface Vlanif100 • ip address 10.23.100.1 255.255.255.0 • dhcp select interface • # • interface Vlanif101 • ip address 10.23.101.1 255.255.255.0 • dhcp select interface • # • interface GigabitEthernet0/0/1 • port link-type trunk • port trunk allow-pass vlan 100 to 101 • # • interface GigabitEthernet0/0/2 • port link-type trunk • port trunk allow-pass vlan 101 • # • capwap source interface vlanif100 • # • wlan • security-profile name wlan-net • security wpa-wpa2 psk pass- phrase %^%#mtz0f 7.[`^6RWdzwCy16hJj/Mc!,}s`X*B]}A%^%# aes ~ • ssid-profile name wlan-net • ssid wlan-net • vap-profile name wlan-net • service-vlan vlan-id 101 • ssid-profile wlan-net • security-profile wlan-net • regulatory-domain-profile name default • rrm-profile name default • calibrate auto-channel-select disable • calibrate auto-txpower-select disable • ap-group name ap-group1 • radio 0 • vap-profile wlan-net wlan 1 • radio 1 • vap-profile wlan-net wlan 1 • ap-id 0 type-id 35 ap-mac 60de-4476-e360 ap-sn 210235554710CB000042 • ap-name area_1 • ap-group ap-group1 • radio 0 • channel 20mhz 6 • eirp 127