Eurotherm欧陆 460用户手册.pdfVIP

Power thyristor units 460 series Control of single-phase resistive and inductive loads User Manual © Copyright Eurotherm Automation 1996 All rights reserved. All reproduction or transmission in any form or using any procedure (electronic or mechanical, including photocopying and recording) without the written permission of EUROTHERM AUTOMATION is strictly prohibited. EUROTHERM AUTOMATION have taken particular care to ensure the accuracy of these specifications. However, in order to maintain our technological lead, we are dedicated to the continual improvement of our products and this may lead to modifications or omissions in the current specifications. We cannot be held responsible for any material or bodily damage, losses or costs incurred. Part No HA 174913 ENG Issue 2 Printed in France 11/96 I EUROPEAN DIRECTIVES SAFETY The 460 products installed and used in accordance with this User Manual are designedto comply with the essential protection requirements of the European Low Voltage Directive 73/23/EEC dated 19/02/73 (amended by Directive 93/68/EEC dated 22/07/93). MARK The CE Mark of 460 products implies that the essential protection requirements of the European Low Voltage Directive are observed. The 460 Technical Construction File is approved by a Notified Body, LCIE (Laboratoire Central des Industries ƒlectriques). DECLARATION OF CONFORMITY A CE Declaration of Conformity is available on request. For further information on CE Mark, please contact your nearest Euro