AD7386四路16位双取样解决方案.pdfVIP

AD7386 四路4MSPS 16 位双取样SAR ADC 解决方案 ADI 公司的AD7386 是四路4MSPS 16 位双路同时取样的逐次逼近模数转换器(SAR ADC),工作电压 3.0V-3.6V,吞吐量速率高达4MSPS,模拟输入类型是单端取样,并在CS 下降边沿进行转换数字信号.AD7386 集成了序列发生器和过取样区块,以提高动态贩毒案和减少低带宽时的噪音.器件还包括缓冲的内部2.5V 基准 电压,也可采用外接高达3.3V 的基准电压.转换过程和数据采集采用标准的控制输入,这样很容易和微处理器 或数字信号处理器(DSP)接口,并和1.8V,2.5V 和3.3V 接口兼容,采用单独的逻辑电源.工作温度−40℃到 +125℃.典型的SNR 在外接VREF=3.3V 时为87.5dB, 内部VREF=2.5 V 和OSR=8 时为93dB,典型的INL 为±1.5 LSB.主要用在马达控制位置反抗,马达控制电流检测,声纳,数据采集系统,掺铒光纤放大器(EDFA)和 同相正交解调器.本文介绍了AD7386 产品亮点和主要特性,功能框图和应用电路,以及评估板 EVAL-AD7386FMCZ 主要特性,功能框图,电路图和材料清单. The AD7386 is a 16-bit, dual simultaneous sampling, high speed, s essive approximation register (SAR) ucc analog-to-digital converter (ADC) that operates from a 3.0 V to 3.6 V power supply and features throughput rates of up to 4 MSPS. The analog input types are single-ended and are sampled and converted on the falling edge of CS. The AD7386 has an on-chip sequencer and integrated on-chip oversampling blocks to improve dynamic range and reduce noise at lower bandwidths. A buffered internal 2.5 V reference is included. Alternatively, an external reference up to 3.3 V can be used. The conversion process and data acquisition use standard control inputs, allowing easy interfacing to microprocessors or digital signal processors (DSPs). The AD7386 is compatible with 1.8 V, 2.5 V, and 3.3 V interfaces, using the separate logic supply. The AD7386 is available in a 16-lead LFCSP package with operation specified from −40℃ to +125℃. AD7386产品亮点: 1. 4-channel, dual simultaneous sampling ADC. 2. Pin-compatible product family. 3. High 4 MSPS throughput rate. 4. Space-saving 3 mm × 3 mm LFCSP package. 5. Integrated oversampling block to increase dynamic range and SNR and reduce SCLK speed requirements. 6. Single-ended analog inputs. 7. Small sampling capacitor reduces amplifier drive burden. AD7386主要特性: 16-bit dual simultaneous sampling SAR ADC Single-ended