机动车整车生产一致性审查培训课件.pptVIP

Explanations on COP (Conformity of Production)Check Requirements for Motor Vehicles 国家认监委2008年1号公告，发布了对汽车产品强制认证实施规则进行修订和证书换版的要求，规则编号变更为CNCA-02C-023:2008。The CNCA Announcement No.1 of year 2008 announced therevision of auto product compulsory certificationimplementation rules and the requirements of certificatesupdate, the code of the rules change to CNCA-02C-023:2008 此次规则的修订主要包含以下四各方面的变化：The revision mainly focus on following 4 aspects?技术参数 technical parameters?型式试验及依据标准type approval tests and corresponding standards?工厂审查 factory inspection?车辆一致性证书 motor vehicle certificate of conformity 新规则规定的工厂审查需在2011年7月1日前完成。The factory inspection which according to the newCCC regulation must be finished before 1st Jul,2011. ?工厂审查?生产一致性控制计划－文件化的规定?有关生产一致性控制计划的特殊说明?生产一致性现场审查?质量保证能力审查?生产一致性控制计划执行报告 FACTORY INSPECTION08版实施规则的工厂审查包括生产一致性审查和质量保证能力审查。生产一致性审查包括生产一致性控制计划或生产一致性计划执行报告审查以及生产一致性现场审查。而工厂质量质量保证能力审查条款较原规则少了例行检验、确认检验和生产一致性两个条款，这两项内容则要在生产一致性审查中体现。As specified in the Implementation Rules (version 08), factoryinspection consists of COP check and quality assurancecapability check. COP check comprises the auditing on COPcontrol plan or executive report of COP plan, and the on-siteCOP auditing. Compared to the preceding version, twoclauses (i.e., routine test and confirmative test) are eliminatedas to the quality assurance capability check, which need to beembodied in the COP check. FACTORY INSPECTION生产一致性审查是通过生产一致性控制计划及其执行报告的审查和现场审查，确认批量生产的认证产品和型式试验样品的一致性，以及与认证标准的符合性。COP check is to, via the auditing on COP control plan and its executivereport and the on-site auditing, verify the consistence of mass-producedcertified products with both the type approval samples and the certificationstandards.企业确认产品和样品相一致制定的流程，可以是抽样确认，也可以通过系统管理实现。具体方法，企业自定，关键是企业要有一个确认保证系统。To verify the consistence between products and samples, manufacturermay adopt either sampling or system management. The concreteapproach is subject to manufacturer; provided, however, manufacturershall set up and employ a system for