单片机二进制时钟.docxVIP

单片机二进制时钟 [源码电路] #include reg52.h #include intrins.h #define uchar unsigned char #define uint unsigned int sbit SET_H=P0^6; sbit SET_M=P0^5; sbit SET_S=P1^6; uchar code DSY_CODE[]= //用于显示时钟的编码 { 0x0,0x1,0x2,0x3,0x4,0x5,0x6,0x7,0x8,0x9,0xa,0xb,0xc, 0xd,0xe,0xf,0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17, 0x18,0x19,0x1a,0x1b,0x1c,0x1d,0x1e,0x1f,0x20,0x21, 0x22,0x23,0x24,0x25,0x26,0x27,0x28,0x29,0x2a,0x2b, 0x2c,0x2d,0x2e,0x2f,0x30,0x31,0x32,0x33,0x34,0x35, 0x36,0x37,0x38,0x39,0x3a,0x3b }; uint hour=0,min=0,sec=0,count=0; void delay_ms(unsigned char i) { unsigned char j; while(i--) for(j=124;j0;j--); } void Set_Interrupt_1() { if(SET_H==0) { delay_ms(100); if(SET_H==0) { TR0=0; if(hour23) hour++; else hour=0; //delay_ms(50); TR0=1; P0=~DSY_CODE[hour]; P1=~DSY_CODE[min]; P2=~DSY_CODE[sec]; } } } void Set_Interrupt_2() { if(SET_M==0) { delay_ms(100); if(SET_M==0) { TR0=0; TH0 = (65535-50000)/256; TL0 = (65535-50000)%256; if(min59) min++; else { min=0; hour++; if(hour==24) hour=0; } // delay_ms(50); TR0=1; P0=~DSY_CODE[hour]; P1=~DSY_CODE[min]; P2=~DSY_CODE[sec]; } } } void Set_Interrupt_3() { if(SET_S==0) { delay_ms(100); if(SET_S==0) { TR0=0; if(sec59) sec++; else { sec=0; min++; if(min==60) { min=0; hour++; if(hour==24) hour=0; } } //delay_ms(50); TR0=1; P0=~DSY_CODE[hour]; P1=~DSY_CODE[min]; P2=~DSY_CODE[sec];; } } } void main() { P0 = 0xff; P1 = 0xff; P2 = 0xff; TMOD = 0x01; TH0 = (65535-50000)/256; TL0 = (65535-50000)%256; //IE = 0x82; ET0=1; TR0 = 1; EA=1; while(1) { Set_Interrupt_1(); Set_Interrupt_2(); Set_Interrupt_3(); } } void Time0() interrupt 1 { TH0 = (65535-50000)/256; TL0 = (65535-50000)%256; if((count+1)!=20) { } else { count++; return; if((sec+1)!=60) { } else { P2=~DSY_CODE[++sec]; sec=0; if((min+1)!=60) { P1=~DSY_CODE[++min]; } else else { min=0; if((hour+1)!=60) { P0=~DSY_CODE[++hour]; } else { hour=0; } } } count = 0; } }