β nucleating agent NTAapplications分析和总结内容.docxVIP

βnucleating agent Grade: NT-A Appearance: white crystal powder Density: 2.8 g/cm3 Chemical composition: pimelate Particle size: pass through 100 mesh sieve Advantages: shorten the processing cycle, increase the toughness and HDT of Polypropylene, etc. Price: $ 17.18/Kg (supplied in China, not include any fee abroad) Application: Example 1: automobile storage battery shell Table 1. Properties of propylene-ethylene block copolymers Properties Standard EPF30R ZK1240D* AY-564 MFR (g/10min) GB/T 3682-88 12 12 15 Tensile strength at yield (MPa) GB/T 1040-92 25 22.5 23 Tensile strain at yield (%) GB/T 1040-92 380 490 100 Flexural strength (MPa) GB/T 9341-88 1111 1001 1000 Izod impact 23℃ GB/T 9432-88 46 85 70 strength (J/m) -20℃ 22 45 22 Rockwell hardness GB/T 1634-79 72 70 75 * containing 0.1% NT-A, base resin: EPF30R Figure 1. WAXD spectra of EPF30R and ZK1240D （1：EPF30R，2：ZK1240D） Example 2: automobile bumpers Table 2. Performance of PP, β-PP, β-PP +20% calcium carbonate masterbatch Item PP1 β-PP2 β-PP2 + 20% CaCO 3 masterbatch Density (g/cm3) 0.88 0.88 0.98 MFR (g/10min, 5 Kg) 8.0 8.0 Tensile strength (MPa) 38.2 36.1 37.0 Tensile strain at break (%) 410 413 410 Flexural modulus (MPa) 1005 920 1150 Izod notched impact strength 10.3 38.1 38.8 (kJ/m2) HDT (℃) 85 78 86 Mold shrinkage (%) 1.52 1.64 1.33 1: EPS30R; 2: EPS30R+0.1% NT-A Figure 2. DSC spectra of PP （1：EPS30R doped with 0.1% β nucleator；2：EPS30R PP） Example 3: β-PP-R pipes Table 3. Properties of β-PP-R raw material Test item Unit Test result Standard Tensile strength MPa 36.9 GB/T1040-1992 Tensile strain at break % 348 GB/T1040-1992 Flexural strength MPa 28.0 GB/T9341-2000 Flexural modulus MPa 658 GB/T9341-2000 Impact strength（unnotched），0℃ kJ/m2 No break GB/T1043-1993 Impact strength（unnotched），-10℃ kJ/m2 No break GB/T1043-1993 Impact strength（unnotched），-15℃ Relative density kJ/m2 No break 0.909 GB/T1043-1993 GB/T1033-1986 VST（1Kg，120℃/h） ℃ 136 GB/T1633-2000 HDT（0.45MPa） ℃ 87 GB/T1634.2-2004 MFR（230℃，2160g