端子连接器用铜及铜合金带箔材（英文版）.pdfVIP

端子连接器用铜及铜合金带箔材 Copper and copper alloy strip and foil for terminals and connectors 1 Scope This document specifies the classification,sign, technical requirements, test methods, inspectionrules,marking, packaging,transportation, storage,accompanyingdocuments and order contents of the copper and copper alloy strip and foil used for terminals and connectors. This document isapplicable to the copper and copper alloy strip and foil(here inafter referred to strip and foil) used for terminals and connectors. 2 Normative reference Thefollowingnormativedocuments,through reference inthistext,constituting the indispensableitemsofthisdocument.Fordated references,onlytheedition cited applies. For undated references, the latestedition of the normative document (includingany amendments) referred to applies. GB/T 232 Metallic materials — Bend test GB/T 351 Metallic materials — Resistivity measurement method GB/T 4340.1 Metallic materials — Vickers hardness test — Part 1: Test method GB/T 5121 (AllParts) Methods for chemical analysis of copper and copper alloys GB/T 5231 Designation and chemical composition of wrought copper and copper alloys GB/T 8170 Rules of rounding off for numerical values expression and judgement of limiting values GB/T 8888 Wrought heavy non-ferrous metal products — packing, marking,transportation, storing and certificate of quality 3 GB/T 26303.3 Measuring methods for dimensions and shapes of wrought copper and copper alloys-Part 3: Sheets and strips GB/T 32791 Electromagnetic (eddy-current) examination method for electrical conductiv ity of copper and copper alloys GB/T 34505-2017Copper and copper alloy materials— Tensile testing at room temperature GB/T 39152 Test method of the bending stress relaxation for copper and copper alloys. YS/T 482Methods for analysis of copper and