IPC-A-610国际标准中英文对照(17).pdfVIP

IPC-A-610 国际标准中英文对照 4.6.2 Heat sink-Contact 散热片 ――接触片 arget-Class 1,2,3 目标——等级 1,2,3 · Component and heatsink are in full contact with the mounting surface. 组件和散热片与安装表面完全 接触 · Hardware meets specified attachment requirements. 部件满足规定的接触要求。 Figure 图 4-64 1. Heat sink 散热片 Acceptable-Class 1,2,3 可接受的 ——等级 1,2,3 · Component not flush. 组件不平齐 · Minimum 75% contact with mounting surface. 至少有 75%与安装表面接触 ·　 Hardware meets mounting torque requirements if specified. 如果有规定，部件满足安装的转距要求 Figure 4-65 1. Gap 2. Heat sink Defect-Class 1,2,3