聚乙烯-介孔硅片复合体系的研究.pdfVIP

I 关键词：聚乙烯，介孔硅片，复合，阻隔性 材料的热稳定性有所提高。 合研究表明复,DSC考察了复合材料的热稳定性,中PE通过添加不同量的介孔硅片到 有望在阻隔性材料中得到应用；,基体中PE并均匀分散在,硅片保持原来的片状形态 孔介 方法对产物进行了表征。结果表明：DSC和SEM 介孔硅片复合材料，用PE/ 了 备无机复合材料。本文使用合成的介孔硅片作为分散相，制/到具有阻隔性能的有机 种通过形态控制得到的具有片状形态的无机材料，将聚乙烯和介孔硅片复合有望得 介孔硅片是一 溶剂阻隔性差，使其在农药、汽油等的包装行业中的应用受到限制。 工业、农业及日常生活中，在塑料工业中占有举足轻重的地位。但是由于聚乙烯的 于及一些具有特殊性能的产品。其特点是价格便宜，性能较好，可广泛应用 (HDPE) 、高密度聚乙烯LDPE) (L、线型低密度聚乙烯(LDPE)种，主要包括低密度聚乙烯 是通用合成树脂中产量最大的品(PE)聚乙烯目前应用于各种行业当中。聚乙烯 要 摘 介孔硅片复合体系的研究/聚乙烯 聚乙烯/介孔硅片复合体系的研究 Abstract Polyethylene used in a wide range of industries is now. Polyethylene (PE) is common synthetic resin production in the largest varieties, including low-density polyethylene (LDPE), linear low density polyethylene (L LDPE), high-density polyethylene (HDPE) and some of the Special performance of the product. Its characteristics are cheaper, better performance, can be widely used in industry, agriculture and daily life, in the plastics industry occupies a pivotal position. However, because the solvent polyethylene barrier difference to the pesticides, gasoline and other packaging industry in the application is limited. Malodorous through the silicon is a form of control has been the patchy form of inorganic materials, polyethylene and mesoporous silicon compound is expected to be barrier properties of the organic / inorganic composite materials. In this paper, the use of silicon as the mesoporous dispersed, prepared by PE / mesoporous silicon composite materials, using methods of SEM and DSC products were characterized. The results showed that: mesoporous silicon sheet to maintain the original shape and evenly distributed in the PE matrix, the barrier is expected to be material in the application by adding different amounts