石灰湿法脱硫除尘旋流板塔系统的设计.pdfVIP

石灰湿法脱硫除尘旋流板塔系统的设计 摘 要 吸收塔是烟气脱硫除尘工艺的核心部分，旋流板塔是板式吸收塔的一种，它具 有脱硫效率高和除尘效率高等优点。 本文主要对一台 65t/h 锅炉的石灰湿法烟气脱硫除尘的主要设备旋流板塔进行 设计。石灰湿法烟气脱硫除尘的工艺流程为石灰碱液作为吸收剂，对其燃煤烟气进 行脱硫除尘，流出的废水经处理后循环使用。 本文首先对旋流板塔脱硫除尘的技术背景、工作原理、技术特点、工艺流程、 应用情况、存在的问题及解决方法等方面作简要说明和介绍；其次的主要工作是从 脱硫除尘工程的本体——旋流板塔塔体高度、塔径、塔盘参数、除雾板等方面着手 进行设计；并对其石灰浆液制备供给系统和引风系统进行设计与选型；最后进行了 塔体的强度校核和整个工程的经济概预算。 关键词：烟气脱硫，除尘，旋流板塔，设计 I 石灰湿法脱硫除尘旋流板塔系统的设计 Abstract Adsorption tower is the main unit of wet lime desulphurization and dust removing technology . The rotating stream tray tower is a kind of adsorption tower and has advantages of high SO removal and dust-removing . 2 This paper designs a tower which was equipped with rotating tray and constructed for a coal-fired boiler (65t/h) in a factory in order to remove dust and SO from flue gas . 2 This flow of SO removal and dust-removing is a wet removing process with limewater 2 as absorbent , and the effluent should be recycled after treatment . In this paper , the main work is following . Firstly , the basic principle、reaction principle 、technical process 、technical background 、application status、existed problems and solution methods are simply introduced . Secondly , the tower main body such as the height 、the dimmer、the trays and so on is in detain calculated . Thirdly , strength check and economic budget of the project are analyzed . Key words：FGD , dust-removing , rotating stream tray tower , design II 石灰湿法脱硫除尘旋流板塔系统的设计 目 录 第一章 前言 1 1.1 选题背景 1 1.2 国内