实木地板块加工机电气控制系统设计.pdfVIP

实木地板块加工机电气控制系统设计 摘 要 本课题来源于实际生产。实木地板是经过了选料、裁断、刨削等粗加工工序后 再经过现代化生产设备加工使之完成抛光、涂漆、紫外线固化等工序所生产出的地 板材料。本次设计任务包括实木地板加工机中的紫外固化电路设计，抛光电路原理 设计及传动系统及速度检测设计。其中，紫外固化电路设计就是要对 UV 灯进行合 理安排，选好电容板及漏磁变压器。而抛光电路原理设计主要是对电机的选择等。 在传动系统设计中要求实现无级调速，这需要采用变频调速技术，选择合适的变频 调速器。为了实现对此传动系统的线速度进行检测，本设计采用了传感器检测与单 片机转换并输出到LED数码管的方法来完成。另外，对本次设计各单元电路的经济 技术进行论证也是一个重要问题。本课题通过参观、实习，了解该设备的外部功能 及控制要求，设计出满足该设备要求的控制系统。通过总体设计、抛光及传动和紫 外线固化电路的设计，使我受到工程实践的全面训练。 : 关键词 紫外固化, 变频调速，传感器，单片机 实木地板块加工机电气控制系统设计 Abstract This subject stems from produces actually. The real timber apron has been selected materials, decide , rough machining of planing etc. undergo modern production equipment is it make their completion polishing , painting , ultraviolet solidification ,etc. process to process after the process, after this line of processes, can produce out the bright , beautiful real timber apron . Design the task including purple other solidification circuit in the real processing machine of timber apron to design this time, the principle design and transmission and speed of polishing circuit are measured and designed. Among them, the purple other solidification circuit will carry on the rational arrangement to UV light when being designed, choose the electric capacity board and megnetism leakage voltage transformer. And it is mainly choice to the electrical machinery ,etc. that the polishing circuit principle is designed. Demand to realize the stepless speed regulation in the transmission design, this needs to adopt frequency conversion to adjust speed technology, choose th