毕业设计说明书 6t平衡重式内燃叉车制动系统结构设计.doc

毕业设计题目 6t平衡重式内燃叉车制动系统结构设计 设计参数:（参照柳工6t叉车数据）: 额定起重量6t 载荷中心距600mm 最大起升高度3000mm 货叉自由起升高度205mm 传动形式液力最大行驶速度最大爬坡度(满/空载) ≥%20 最小转弯半径3300mm 总长(不含货叉)3517mm 总宽2040mm 轴距2250mm 轮距(前轮)1492mm 轮距(后轮)1730mm 悬距(前/后)587/680mm 轮胎(前轮) 8.25-15-14PR轮胎(后轮) 250×15-16PRThe braking system is one of the most important vehicle systems, but also the vehicle driver should pay attention to the most aspects. Because the vehicle braking system is a system must have the normal work of the vehicle, its quality and safety of vehicles have the inseparable relations. The braking means is varied, but the vehicle most use the brake friction type, vehicle brake can be divided into disc brake and drum brake. The design through a variety of information on learning, and related types of brake, the brake disc. Through the analysis of disc brake principle, on the base of original data, according to automotive design, through the analysis of the force of brake, brake torque is determined, the friction disk size, pedal force and basic parameters such as brake pedal travel; through the analysis of the structure of the brake, the friction plate design the structure, the friction lining structure, brake spring structure and the structure of the hydraulic cylinder; and according to the design requirements of the installation requirements. Disc brake of the design to meet the requirements of brake design theory, can guarantee in the running process of the automobile braking and emergency braking, and ensure the safe braking ramp. Therefore, to achieve the brake can guarantee the drivers safety objective. Key words: Vehicle Disc Brake 目 录 设计任务书……………………………………....………………………...................I 摘要………………………………………………………………………..................II Abstract……………………………………………………………………................III 引言...