福特标准 ES-XW7T-1A278-AC.pdfVIP

Ford Motor Company Component and Subsystem Electromagnetic Compatibility Worldwide Requirements and Test Procedures ES-XW7T-1A278-AC Date Issued: October 10 2003 Forward This engineering specification addresses electromagnetic compatibility (EMC) requirements for electrical and/or electronic (E/E) components and subsystems for Ford Motor Company (FMC), which includes all of its associated vehicle brands. This specification is the direct link from ARL-09-0466. These requirements have been developed to assure compliance with present and anticipated domestic and foreign regulations in addition to customer satisfaction regarding the EMC of vehicle E/E systems. This specification replaces ES-XW7T-1A278-AB. Information regarding differences between these specifications may be found at . This specification is applicable to all E/E component/subsystems whose commercial agreements are signed after the October 10, 2003. These requirements, all or in part may also be adopted for current components and subsystems, but with written approval from the FMC EMC department. Questions concerning this specification should be directed to: spec_questions@ Release Date: 10/10/2003 Printed copies are uncontrolled FORD MOTOR COMPANY ES-XW7T-1A278-AC Table of Contents: 1.0 Scope 6 1.1 Purpose of the Specification 6 1.2 Use of this Specification 6 1.3 Additional Information 7 2.0 References 7 2.1 International Documents 7 2.2 Military Standards 7 2.3 Other Documents 8 3.0 Abbreviations, A