模具设计论文06828.docVIP

摘 要 以某品牌电脑台式机电源插槽模型为例，分析了其外壳结构特征，使用Pro/E软件进行插槽壳体设计，利用注塑模设计专家(EMX)燕秀外挂进行插槽壳注塑模具设计。为了减少试模次数，降低设计成本，选用Moldflow软件对塑件进行模具设计的优化分析，浇口优化设计的流程图，并对台式机电源插槽壳进行了流动模拟分析。 在进行塑件3D设计后，利用CAD进行2D的排位，制图和出图。主要注射模的定模机构、动模机构、浇注系统、导向装置、顶出机构、冷却和加热装置、排气系统等的设计。 塑件流动模拟分析内容包括：充填分析、保压分析、残余应力分析。主要包括，充填时间、平均速度、气穴、熔接痕、体积收缩率、塑件变形等，由此获得满意合理的浇口数量和位置。 此次台式机电源插槽的模具设计表明，使用CAD/CAE技术可以大大缩短制品的开发周期，优化注塑模具设计，提高企业的市场竞争力。 关键词： PRO/E；CAD/CAE；Moldflow；优化设计；注塑模 ；台式机电源插槽。 Abstract To acertain brand of desktop power supply slot models, for example, analyzes the characteristics of its shell structure, using Pro / E software for desktop power supply slot case design, use of injection mold design experts (EMX) plug-in for desktop power supply slot shell plastic injection mold design.?To reduce the testing model, lower cost, and use Moldflow software for plastic mold design optimization analysis, optimal design of flow chart gate, and the desktop power supply slot case for simulation.? Plastic 3D design course，the use of 2D CAD for qualifying, drawing and drawing.?Fixed mold injection mold main body, the dynamic model agencies, casting systems, guiding device, top the body, cooling and heating equipment, exhaust system design.? Plastic flow simulation analysis include: filling analysis, packing analysis, residual stress analysis.?Include, filling time, average speed, air traps, weld lines, volume shrinkage, plastic deformation, thus reasonably satisfactory number and location of the gate.? The desktop power supply slot shell mold design that the use of CAD / CAE technology can greatly shorten the product development cycle, injection mold design optimization, and improving market competitiveness. Key words: PRO/E;CAD / CAE; Moldflow; Optization design; Injection mold; Desktops power slot. 目 录 1. 绪论 1 1.1 模具在加工工业中的地位 1 1.2 MP3/MPM系列电子产品模具的发展趋势 1 2．MP6外壳及其主要零件的结构设计 2 2.1 基于Pro/E设计软件的MP6外壳及其主要设计 2 2.1.1 结构分析 2 2.1.2 工艺性分析 3 2.2 MP6外壳的材料选择 3 2.2.1 MP6外壳材料选择 3 2.2.2 MP6外壳材料成型参数 5 2.2.3 MP6外壳塑件体积和质量计算 5 3 成型零部件设计