仪表与自动控制专业英语 教学课件 作者 刘南 主编 梁亮渠珊珊 副主编 教案 11.docVIP

课程教学单元设计 序号 11 单元题目 EJA430 MODEL AND SUFFIX CODES 学时 2 授课班级 自动化3091、2 上课地点 2103 教 学 目 标 能力（技能）目标 知 识 目 标 能熟练背诵专业单词及重点词组； 会正确翻译课文。 了解EJA430型号和规格代码 能力训练 任务 在教师讲解专业单词的基础上进行课文译读 了解EJA430型号和规格代码 教师知识与 能力要求 任课教师在具有扎实的专业理论和实践知识及相关能力的同时，应具有一定的英语水平。 学生知识与 能力准备 在具有一定的专业理论的同时，应具有一定的英语水平。 教学材料 校本活页教材 工具准备 /home.htm /web/product2.asp 各类自动化仪表说明书 教学过程 教学内容 教学方法与手段 学生活动 时间 分配 复习 进行提问，回忆上次课内容 EJA430A物理规格 教师提问 个别回答 5 课文翻译 教师引导同学进行课文翻译，及时指出并纠正同学的错误。 二、MODEL AND SUFFIX CODES The “” marks indicate the most typical selection for each specification. Example: EJA430A-DAS5A-92NA/_ The ‘#’marks indicate the construction materials conform to NACE material recommendations per MR01-75. For the use of SUS316 material, there may be certain limitations for pressure and temperature. Please refer to NACE standards for details. *1: Indicates high pressure side cover flange and process connector material. Material of low pressure side cover flange (open to atmosphere) is SCS14A. *2: Diaphragm material is Hastelloy C-276 or ASTM N10276. Other capsule wetted parts materials are SUSF316L, SUS316L or ASTM grade 316L. *3: Indicates diaphragm and other capsule wetted parts material. *4: Indicated material is equivalent to ASTM CW-12MW. *5: Indicated material is equivalent to ASTM M35-2. *6: If necessary, specify Mounting bracket code C or D. *7: If necessary, specify Mounting bracket code A or B. *8: Not applicable for Output signal code F and G. *9: Users must consider the characteristics of selected wetted parts material and the influence of process fluids. The use of inappropriate materials can result in the leakage of corrosive process fluids and cause injury to personnel and/or damage to plant facilities. It is also possible that the diaphragm itself can be damaged and that material from the broken diaphragm and the fill fluid can contaminate the users process fluids. Be very careful with highly corrosive process fluids such as hydrochloric acid, sulfuric acid, hydro