阻抗±5%25公差影响因素分析与探讨.pdfVIP

产品检测与可靠性 Inspection and Reliability 印制电路信息 2013 No.4 阻抗±5%公差影响因素分析与探讨 Paper Code: S-075 廖 辉 （深南电路有限公司，广东 深圳 518053） 摘 要 如何保证各种信号(特别是高速信号)完整性，如何保证信号传输质量，PCB板控制信 号线的特征阻抗匹配成为关键，不严格的阻抗控制，将引发信号传输的失真何信号的 反射，导致设计的失败，本文主要针对影响阻抗控制关键因素进行初步分析和研究， 为保证信号传输的稳定性，提供控制规范和参考；为业界实现阻抗控制提供一定的参 考何借鉴。 关键词 内层线宽；外层线宽；层压半固化片介厚；铜厚；油墨厚度；阻抗±5% 中图分类号：TN41 文献标识码：A 文章编号：1009-0096（2014）04-0082-06 Impedance ±5% tolerance factors analysis and discussion LIAO Hui Abstract How to ensure that the various signals (especially high-speed signal) integrity, how to ensure the quality of signal transmission, PCB board characteristic impedance control signal line becomes the key, not strictly controlled impedance, will lead to any distortion of the reflected signal transmission signals, resulting in failure design, the paper mainly for impedance control key factors affecting the preliminary analysis and research, in order to ensure the stability of signal transmission, providing control specifications and reference; provide a reference for the industry to learn how to achieve impedance control. Key words Inner Width; Outer Width; Dielectric Thickness of the Laminate PP; Copper Thickness; The Thickness of the Ink; The Impedance ±5% 1 前言 提出更高要求，针对PCB板影响阻抗因素，进行分 析，主要有以下几点：内/外层线宽、层压半固化片 随着PCB 应用越来越广泛，电路设计日趋复 介厚、电镀铜厚、油墨厚度、进行控制，使最终实 杂和高速，如何保证各种信号（特别是高速信号）