转炉-ANS-连铸工艺生产低碳铝镇静钢洁净度的研究.pdfVIP

  • 3
  • 0
  • 约6.05千字
  • 约 4页
  • 2017-08-14 发布于安徽
  • 举报

转炉-ANS-连铸工艺生产低碳铝镇静钢洁净度的研究.pdf

第十二届全国炼钢学术会议论文 i;=;i;;=;;;;;;;;;;;;i;;;i;;;;;;ii;;;;;;;;i;;;;;; 转炉一ANS一连铸工艺生产低碳铝镇静钢洁净度研究 李超马学中孙群孟劲松王霆张富强 (鞍钢新钢铁有限责任公司1 李宏王丈军袁晓鹏王新华 (北京科技大学1 摘要采用转炉一ANs精炼一连铸工艺生产低碳铝镇静钢,ANS处理后钢液T【O】含量在35~56ppm之间, 铸坯中总氧含量在25ppm左右。铸坯中主要的非金属夹杂物为微小的块状AJ203夹杂物和少量较小尺寸的 簇群状AI:03夹杂物,铸坯中尺寸大于501』m的大型非金属夹杂物含量低于lmg/lOkg。 关键词低碳铝镇静钢连铸坯非金属夹杂物 Ⅵ INVESTIGATIONoNCLEANNESSOFLOWCARBoN STEEL PRODUCEDBYBoF-AnS-CCPRODUCTIoNRoUTE Li chaoMa Sun Xuezhong QunMangJinsongWangTingZhangFuqiang IronandSteel (Anshan Corporation) Li Yuan Xinhua HongWangWanjun XiaopengWang ofScienceand (Uv./versity TechnologyBeijing) wasmadecleannessand ABSTRACT on non-metallicinclusionsofLCAKsteeJ with InvestiSation produced routeItis thatthetotal of BOF·ANS-CC found contentthe steel ANS is production oxygen liquid T[O】afterrefining betweenand andthe contentofthecontinuouscastsial+isaround non-metallicinclusions 35ppm56ppm r[Ol 25ppm.The observedinslab bloek afewofsmallsized clusters.Thea.mountofthe specimensnfl叠inly∞efmeshippedA1203and A1203 sizednon·metallicinclusions slabsislessthan1mg/lOkg larger f50tim)in WORDSLCAK ContinuOusNon-metallicinclusions KEY stecl casting 低碳铝镇静钢被广泛地用于生产深冲用冷轧钢板,对钢的洁净度即钢中非金属夹杂物的含量有严格的 要求。鞍钢生产低碳铝镇静钢主要采用两种工艺:1)

文档评论(0)

1亿VIP精品文档

相关文档