算绘一体化在抗震墙配筋校核中实现.pdfVIP

算绘一体化在抗震墙配筋校核中的实现 王晓舟 （中国汉嘉设计集团股份有限公司，杭州 310005 ） 摘要：建筑结构施工图绘制中修改的频繁性、复杂性和紧迫性给设计人员带来很大的压力，同时，类同工程项目 施工详图表达的高度近似和开放性为设计人员绘图的高效率提供了可能性，即对参照图元信息的快捷合理性修 改。本文提出了一种快速校核混凝土抗震墙构件配筋率的新方法，采用 AutoLISP 语言编制的配筋校核程序完全 依托于计算机对 AutoCAD 图形中的数据和实体信息的原位识别，免去其他数据输入，仅鼠标选择即可完成抗震 墙约束边缘构件的配筋校核，与其他应用程序相比，具有复制性好、适应性强，方便、快捷等特点，具有一定的 实用价值。 关键词：AutoLISP ；原位识别；抗震墙；配筋校核 Realization of Calculation and Drawing Integration for Reinforcement Proofreading on Structural Wall WANG Xiaozhou (China Hanjia Design Group Co. Ltd. , Hangzhou 310005) Abstract: The frequent modification, complexity and time limited on the course of construction drawings for building structure give the design staff a lot of pressure. At the same time, the highly approximate expression of detail and its openness to people provides the feasibility of high efficiency to design staff, namely, the modification to reference map information reasonably and quickly. A new method was proposed and illustrated to check reinforcement ratio for restrain boundary part of concrete wall automatically and quickly, using program developed by AutoLISP language on the basis of in-situ graphic information identification under surrounding of AutoCAD entirely, from other time-costly data input, only driving mouse. Compared with other software, the method advantages of good replication, strong adaptability, convenient and fast and so on, and has a certain practical value. Keywords: autolisp; in-situ identification; semiotic wall structure; reinforcements proofreading 随着建筑设计市场的竞争日趋激烈，业主对设计公司的服务质量要求越来越高。对于复杂的建设项目， 技术要求高，反复修改可能性大，设计时间又紧迫，特别对服务于各专业的结构施工图设计人员来说，责 任重压力大。为适应这一行业现状，提高绘图效率成为结构设计工程师按时完成任务的前提。结构施工图 绘制内容多，构件尺寸和