机械毕业设计（论文）-轴承座的工艺及钻孔夹具设计【全套图纸】.doc

本科生毕业设计论文 题 目：轴承座的工艺及钻孔夹具装置设计 专 业：机械设计制造及其自动化 班 级： 161004 学 号： 1 姓 名： 指导教师： 2014 年 06 月 毕业 任务书 题目 轴承座的工艺及钻孔夹具装置设计 摘 要 本次毕业设计的题目是轴承座的工艺及钻孔夹具装置设计。通过本次设计对所学专业课程的理论加以综合并增加生产实践知识，经过实际训练，从而培养和提高个人独立工作的能力 全套图纸，加153893706  ABSTRACT The subject of this graduation project is the bearings part of the process planning and some special fixture design process .Bearing part of the main processing surface is flat and the hole .Known by the principle of processing technology to ensure plane precision than the hole to ensure easy. Therefore,this design follows the principles of the hole after the first plane .And a clear hole and surface processing divided into roughing and finishing stages to ensure accuracy.The bearings part of the process planning according to part size, high precision, the characteristics of complex structure, the preparation of a reasonable application of technical rules, select the appropriate machine tools, special tooling designed to address the processing difficulties, improve product quality. Through this design of the school curriculum to be integrated theoretical and practical knowledge to increase production, through practical training, thereby developing and enhancing the ability of individuals to work independently. Consolidate the relevant course content, master the design method and procedure, and I will work to lay a solid foundation.朗 显示对应的拉丁字符的拼音 KEY WORDS: graduation design, design specifications, machining, process planning字典 名词 summary abstract 朗读 显示对应的拉丁字符的拼音 字典 名词 summary abstract 轴承座的工艺及钻孔夹具装置设计 目 录 摘要 I ABSTRACT II 前 言 III 第1章 零件图分析 1 1.1零件的作用 1 1.3零件的结构分析 2 1.4零件的重要表面和技术要求 2 1.5材料分析 3 第2章 毛坯工艺的确定 4 第3章 零件工艺规程的制定 5 3.1加工方法的选择 5 3.2加工阶段的划分 5 3.3工序集中与分散 6 3.4定位基准选择 7 3.5辅助工序的安排 8 第4章 工艺尺寸换算 11 4.1径向工序尺寸 11 4.2轴向工序尺寸 11 第5章 夹具设计 12 5.1夹具的分类 12 5.2钻床夹具 13 5.3夹具定位元件的选择 14 5.4所