车用CAN总线系统物理层测试台架的设计.pdfVIP

2010 5 设备设计 /诊断维修 /再制造 * CAN 1 2 , ( 1, 512005; 2, 215411) : CAN ,, , CAN , CAN, CAN : CAN; ;; : TH 16 : B : 1671 3133( 2010)05 0148 03 The design of physical layer test bench for veh icle CAN bus system 1 2 HUANG Daxing, CHEN ouguang ( 1DepartmentofAutomobile, College of Shaoguan, Shaoguan 512005, Guangdong, China; 2 Chien Shiung Institute ofTechnology, Taicang 215411, Jiangsu, China) A bstrac t: In order to test the characteristics of CAN bus system. Analyzed the corresponding relationship between length and transm ission rate of the bit, between bit rate and the maxmi um length of bus, and introduced the design process of physical layer testbench for vehicle CAN bus system. Hopping along the slope ofCAN signalswas tested, the results showed that the physical layer CAN bus system meet the design requirements. K ey w ord s: CAN bus; physical layer; bench; test ( Controller Area Network, CAN) CAN, 2 CAN , CAN CAN CAN , CAN , CAN ISO11898, , CAN [ 1, 2] : (Electronic Control Unit, ECU) CAN ( CAN 1 interface), CAN (TestPoint, TP), 1 1 CAN ISO118982, : l d L 2 * (QC200804); ( 200915004) 148 设备设计 /诊断维修 /再制造 2010 5 1 , 1 ldL ISO 118982 / L / m l/ m d / m ,; , - 1 (M bit s ) , 1 40 0 03 0 40 01 ISO 118982MG7