Chapter 30--Examples.ppt

Chapter 30--Examples Problem In an L-C circuit, L=85 mH and C=3.2 mF. During the oscillations the maximum current in the inductor is 0.85 mA What is the maximum charge on the capacitor? What is the magnitude of the charge on the capacitor at an instant when the current in the inductor has a magnitude of 0.5 mA? i=-wQsin(wt+f) At maximum, sin()=1, so i=-wQ Where Q is the maximum value w= Q=0.85e-3/1917 Q=0.44 mC (? Li2)+(q2/2C)=(Q2/2C) We know L=85 mH C=3.2 mF Q=4.4e-7 C We need to solve for q when i=0.5mA q=3.58e-7 C Problem In the circuit to the right, EMF=60 V, R1=40 W, R2=25 W, and L=0.30 H Switch S is closed. At some time t afterward, the current in the inductor is increasing at a rate of di/dt=50 A/s. At this instant what is the current thru R1 and R2 ? After the switch has been closed a long time, it is opened again. Just after it is opened, what is the current thru R1? The inductor acts to oppose the source creating the change So we can replace the inductor with an EMF device, wired to oppose the 60 V device with an EMF= L*di/dt =0.3*50=15 V Using the loop rules I1=60V/40 W = 1.5 A I2=(60-15)/25 W =1.8 A Part B) After a long time, the current becomes steady, and di/dt=0 so I2=60/25=2.4 A At the instant the switch is opened, the inductor maintains this current so I2=I1=2.4 A Problem In the circuit, switch S is closed at t=0. Find the reading of each meter just after S is closed. What is the reading of each meter along time after S is closed? Part B) First! After a long time, the inductors act like regular wire. So we add the 5, 10, 15 W resistors in parallel to get 2.72 W itotal =25 V/ (40+2.72 W )=0.585 A so A1=0.585 A The voltage across the parallel circuit is 0.585*2.72=1.57 V A2=1.57/5 = .314 A A3=1.57/10=.157 A A4=1.57/15=.104 A Part A– The conceptual thing At the very instant that S is closed, inductors are maximally resisting. So they essentially PREVENT current flow through the 5 W and 10 W resistor! A2=A3=0 Thus A1 must equal A4 which i