Satellite Communication.ppt

Satellite Communication Overview Satellite is a microwave repeater in the space. There are about 750 satellite in the space, most of them are used for communication. They are: Wide area coverage of the earth’s surface. Transmission delay is about 0.3 sec. Transmission cost is independent of distance. Satellite up links and down links can operate in different frequency bands: The up-link is a highly directional, point to point link The down-link can have a footprint providing coverage for a substantial area spot beam“. Orbits: LEO: Low Earth Orbit. MEO: Medium Earth Orbit GEO: Geostationary Earth Orbit At the Geostationary orbit the satellite covers 42.2% of the earth’s surface. Theoretically 3 geostaionary satellites provides 100% earth coverage MAC(Media Access Control)  protocols for satellite links ALOHA: Every station can transmit any time Very low efficiency 18- 36 %. FDMA (Frequency Division Multiple Access) It is the oldest and most common. the available satellite channel bandwidth is broken into frequency bands for different earth stations. TDMA (Time Division Multiple Access) channels are time multiplexed sequentially Each earth station gets to transmit in a fixed time slot only. More than one time slot can be assigned to stations with more bandwidth requirements. Requires time synchronization between the Earth Stations. CDMA : (Code Division Multiple Access) Combination of time/frequency multiplexing ( a form of spread spectrum modulation). It provides a decentralized way of providing separate channels without timing synchronization. It is a relatively new scheme but is expected to be more common in future satellites. VSAT Network At the Very Small Aperture Terminal a lower performance microwave transceiver and lower gain dish antenna (smaller size) is used. VSAT networks are arranged in a star based topology. Ideal for centralized networks with a central host (Banking institutions with branches all over the country). Use the S-A