蒲石河抽水蓄能电站机墩结构刚度分析.pdfVIP

8 6 Vol. 8 No. 6 2 0 10 12 Journal of Water Resources and Architectural Engineering Dec. , 20 10 张宏战, 谭杰骥, 马震岳 ( , 116024) : 机墩结构是水轮发电机组的主要支承构件, 其刚度对于机组的运行稳定性有重要的控制作 以蒲石河抽水蓄能电站地下厂房为计算实例, 建立包括机墩结构的厂房整体三维有限元模型, 对机墩结 构的静力刚度和动力刚度进行了复核复核结果表明, 机墩的水平静力刚度和动力刚度均满足设计要 求计算结果还表明, 随着机组荷载频率的变化, 机墩的动力刚度, 动力刚度和静力刚度的大小关系, 最 大动位移( 或最小动力刚度) 出现的荷载组合均出现了变化, 说明机墩的动力刚度与荷载频率密切相关, 因此机墩动力刚度是十分必要的 : 抽水蓄能电站; 地下厂房; 机墩; 动力刚度 : TV 1; TV74 : A : 1672 1144( 2010) 06 0008 0 Study on Stiffness of Generator Pedestals in Pushihe Pumped Storage Power Station ZHANG Hongzhan, TAN Jieji, MA Zhenyue (Hydraulic Engineering College of Construct ion Engineering Faculty , Dalian Univ ersity of Tech nology , Dalian, L iaoning 116024, China) Abstract: The generator pedestal is a main member supporting the hydraulicturbinegenerator unit, whose stiffness plays a deci sive effect on the operation stability of hydroelectric sets. Taking Pushihe Pumped Storage Power Station for example, a threedi mensional model of the whole hydropower house including thegenerator pedestal structure is created, and the static stiffness and dynamic stiffness of the generator pedestal are checked. The results indicate that both the static stiffness and dynamic stiffness of the generator pedestal structure could meet the design requirements. The results also show that the dynamic stiffness value, the relative relation between the static stiffness and dynamic stiffness and the load combinations inducing themaximum dynamic dis placement (or theminimum dynamic stiffness) would varywith the load frequency without exception. It is proved that thedynam ic stiffness of the generator