外文翻译--高频开关电源电路原理.doc

High-frequency switching power Supply circuit of high frequency switching power supply from the following components : first. a main circuit from the exchange network input, DC output of the entire process, including : an import filter : its role is to network the clutter filtration, but also hindered the plane of the clutter feedback to the public grid. 2, rectifier and filter : direct AC power rectifier for smoother DC, for under a transformation. 3, the inverter : Rectifier the high frequency alternating current into direct current, high-frequency switching power supply is the core component of the higher frequency, size, weight and output ratio smaller. 4, and the rectifier output filter : Under load the need to provide stable and reliable DC power supply. Second, the control circuit while output from the sample, with the set standards, then controlled inverter, change its frequency or pulse width output achieve stability, on the other hand, according to test data provided by the circuit by circuit protection identification, Control circuit for the unit for various protection measures. Third, in addition to providing detection circuit protection circuit is running various parameters, but also provide information display instruments. Fourth, the auxiliary power supply circuit for the single power supply to the different requirements. Switching regulator control principle Switching Control Switching Regulators K principle to a certain time interval repeatedly connected and disconnected, connected to the switch K, Input voltage E and K through switching circuit filter to load RL, the entire switch connected, Power E to provide energy load; When K disconnect switch, the input power is interrupted E. energy delivery. This shows that the importation of power to provide energy load is intermittent, for the load can be provided for the energy, Switching power supply must be a set of storage devices, the switches will be connected to a part of the energy stored in the