EAST装配仿真的三维交互和用户界面设计廖祝华.pdfVIP

Vol. 16 No. 10 系 统 仿 真 学 报 Oct. 2004 JOURNAL OF SYSTEM SIMULATION ·2329 · EAST 装配仿真的三维交互和用户界面设计 1,3 1,2 廖祝华 ，刘晓平 (1 中科院等离子体物理研究所, 安徽合肥 230031; 2 合肥工业大学计算机与信息学院VCC 研究室, 安徽合肥 230009; 3 湖南科技大学计算机科学与工程学院, 湖南湘潭 411201) 摘 要：EAST 装配仿真是典型的大型机械装置的装配仿真，规划其复杂几何部件的装配路径需要 提供较好的用户界面和三维交互环境。传统的三维交互、用户界面设计已经不适合EAST 装配仿真。 本文首先简单介绍了大型机械装置EAST 的装配特点和系统设计思想，然后提出了高架行车的运动 模型、用户界面模型和多三维视景的构造方法。最后通过高架行车拟实控制、多三维视景环境、视 景与控制界面相分离的实现创建了自然、高效的EAST 装配仿真用户界面和三维交互环境。 关键词：EAST ；装配仿真；三维交互；用户界面 文章编号：1004-731X (2004) 10-2329-03 中图分类号: TP 391.9 文献标识码: A Design of 3D Interaction and User Interface for EAST Assembly Simulation LIAO Zhu-hua 1,3, LIU Xiao-ping1,2 1 ( Institute of Plasma Physics, Chinese Academy of Sciences, Hefei Anhui 230031, China; 2VCC Division, School of Computer and Information, Hefei University of Technology, Hefei Anhui 230009, China; 3School of Computer Science Engineering, Hunan University of Science Technology, Xiangtan Hunan 411201, China) Abstract: Simulating assembled of EAST is typical simulation assembling of large mechanism. For planning assembly path for its complicated part, it needs better 3D interaction environment and user interface to make interactive operation. Traditional 3D interaction and user interface do not suit EAST assembly simulation. The paper introduces assembling characteristic of EAST and system philosophy simply at first, then presents movement model of overhead