介质表面检测及其处理系统的研究.pdf

万方数据 Subject : Research on surface detection and processing system for object Specialty : Electronics and Communication Engineering Name : ShenPeng (Signature) Instructor : HanXiaobing (Signature) ABSTRACT With the development of production technology, the production efficiency of enterprises continuously improve, product quality testing has become a major factor that restricts the production process. High quality detection can not only raise consumer acceptance of products, but also can save production costs, reduce the waste of raw materials. The author proposes a surface detection and processing system based on FPGA for products. The author proposes a surface detection and processing system based on FPGA for products, through the image surface products on the acquisition of the edge detection to detect the existence of cracks and other defects of products. Firstly, using a CCD image sensor to obtain the image of products, then the CCD image sensor transfer the image to FPGA development board after converting the image format; the image will be stored in SDRAM by FPGA development board, on the other side, FPGA development board will get edge measuring for the image through logic operation, and after the image processed, FPGA development board will send it to the VGA display. The processed image can be easily distinguished whether the product is qualified by its surface features. In this system, the author designed four modules including image acquisition module, image storage module, image process