《协同式虚拟产品外形设计与快速试制系统研究》.pdfVIP

系 统 仿 真 学 报 Vol. 16 No. 9 • 1974 • JOURNAL OF SYSTEM SIMULATION Sept. 2004 协同式虚拟产品外形设计与快速试制系统研究 张 伟 张为涵 林 亨 (清华大学工业工程系, 北京 100084) 摘 要 随着科技的发展以及竞争的全球化 产品开发越来越重视产品的创意 个性化以及如何缩短 产品的开发周期 本文介绍了一种基于虚拟现实和网络化协同的产品设计平台 应用虚拟现实技术建 立自然的设计界面 利用专用位置输入装置产生一系列的虚拟切割动作 让网络用户实现协同设计并 自由地表达设计思想 同时还可以快速试制出设计的产品 文章最后通过实验展示了本平台的可行性 和有效性 关键词 虚拟设计 人机界面 快速试制 虚拟现实 协同设计和制造 文章编号 1004-731X (2004) 09-1974-04 中图分类号 TP391.9 文献标识码 A Research of a Collaborated Virtual Product Shape Design and Rapid Manufacturing System ZHANG Wei, ZHANG Wei-han, LIN Heng (Department of Industrial Engineering, Tsinghua University, Beijing 100084, China) Abstract: With the technology development and world-wide competition, how to achieve individuation, originality and shorten the time to market has become more and more critical for new product development. It is introduced in this paper a novel product shape design platform based on virtual reality (VR) and networked collaboration. VR technology is used to establish a natural design interface and a special input device with feedback is used to record designer’s design operations. This platform allows designers to express their design ideas easily and obtain the manufactured model rapidly. A series of experiments have been conducted to demonstrate the feasibility and effectiveness of this platfo