AquaMSBRPPT-Lite.pptVIP

与A2/O、氧化沟等工艺相比，无需初沉池/二沉池，占地面积小，节省土建费用 拥有序批反应器工艺的优点，且设备利用率更高 采用专利Aqua MixAir?搅拌曝气装置，安装维护方便，搅拌曝气效果好，且能耗更低 独特的泥水分离+预缺氧区设计，较之其他生化工艺回流污泥量更小，实际停留时间更长，脱氮除磷效果更佳 采用低扬程穿墙泵，运行能耗低 优点 序批区采用专利消能挡板设计，改善沉淀区域水力状态 采用专利空气出水堰，出水水质水量稳定，运行维护简单方便 结合A2/O及SBR工艺优点，抗冲击负荷能力强，处理效果好 全自动运行，可根据实际水质水量进行工艺参数调整，运行方式灵活多变 优点（续） * * * Good morning, today AASI has one of the most complete ranges of biological systems available on the market. Today you will receive presentations on our batching technologies, flow through technologies and membranes systems. The aim of this presentation is to give an overview of the process mechanical and life cycle advantages that hold true for all of these technologies. Let’s begin by looking at an overview of the presentation… * * The AquaPASS system, like our other biological treatment systems falls after primary treatment, screening and grit removal and before filtration and disinfection processes. Like the MSBR and SBR systems, it is a secondary treatment process, we just accomplish the treatment in a slightly different way. So what will we be discussing in this presentation? *click* * Over the course of this presentation on the AquaPASS we will be discussing the following: *click* First we will start off with a brief introduction of what the AquaPASS is, provide an introduction to this technology and some of the ways it is different from traditional flow through systems. *click* We will then go through each of the steps of the AquaPASS process and talk about the mechanical and the process steps that are occurring in each of the phases and steps of the process, and how the AquaPASS can be adapted to different levels of effluent requirements *click* We will then take a look at a couple of applications where this technology has been applied in the field to achieve a new permit requirement and why it was chosen. *click* The next part of the presentation is a look into some comparisons with some real numbers of the AquaPASS vs. other flow through technolog