电子与通信工程专业英语 作者 徐存善 Unit 26.ppt

Unit 26 User’s Manual User’s Manual User’s Manual Step 4 Choose Acquire from your application software to bring up MiraScan (this may also differ according to the application you use).  Step 5 From the MiraScan main screens (Fig. 26-2), select Reflective in the Original combobox, and then click Preview. A preview image will appear in the Preview Area. Step 6 Adjust the scan area in the Preview Area. Step 7 Use the options in the Combo Boxes to specify the Resolution, Scale…etc. That will apply to the scanned image. Step 8 Use the options in the Tool Bar to adjust the image. Step 9 If you need to add another scan area (scan job) to the original, push the Duplicate button in the Job List to add a new job (Fig. 26-3). The repeat Step 6 and 7 to do the settings for that scan job. Step 10 After you have finished with the settings for each scan job, press the Scan button to scan.  Step 11 A few seconds later, the scanned image(s) will be imported into your application software. You can start to edit the image(s). Understanding MiraScan Functions 1. Menu Bar There are three selectable menu items in the Menu Bar (Figure 26-2)．Each menu item contains several options in its submenu. 2. File submenu MiraScan can record the settings you make for each scan session in a configuration file. With this feature, you can specify different settings for each scan job in each configuration file. Load the configuration file when you want to apply the settings. For example, you can save the settings you make for scanning magazine pictures in a configuration file and name it “Magazine”. The next time you want to scan a magazine picture, you can load the “Magazine” configuration file and MiraScan will apply the settings recorded in it. 1) Load Config Load the configuration file you created. When the configuration file is loaded successfully, MiraSca