电力线数字扩频通信系统——发送部分.pdf

Abstract Abstract The spread spectrum (SS) communication system has stronger ability of resisting jamming, narrow band, and multipath interference than that of the conservation communication system. And because of its lower transmitting power spectrum, it also has the characteristics of low probability intercept and multiple access secure communication. The SS technology has been developing rapidly and has more and more comprehensive applications from the middle of the 50’s to nowadays. It has shown strong vitality on the side of communication, data transmission and secure communication. This thesis primarily discussed and simulated the transmitting part of digital power line SS communication system based field programmable gate array (FPGA) ASIC chip. The power line communication, the SS communication system and the design technique of FPGA have been discussed in this thesis. The system mainly consisted of the PN code generator, the SS implement, the absolute-to-relative code convertor, the digital sine wave signal generator, 2DPSK modulator and D/A convertor. This thesis simulate the transmitting system of digital power line SS communication and achieve simulation respectively on the software platform of MAX+PLUSII, the hardware test is also succeed. Chapter one introduce the aim and meaning of the task, the development related to PLC at present in the world, the signal transmitting characteristic on power line, the summarize of SS communication technique, and the mainly content and design of the task. Chapter two introduces the background related to the theory. It mainly contains the