SolidMechanicsHomeworkAnswers(doc)-Teach.docVIP

Solid Mechanics Homework Answers Please show all of your work, including which equations you are using, and circle your final answer. Be sure to include the units in your answers. The yield stress of steel is 250 MPa (250,000,000 Pa). A steel rod used for an implant in a femur needs to withstand 29 kN (29,000 N). What should the diameter of the rod be to not deform? yield stress ((y) = 250 MPa F = 29 kN d = ? d = 0.0122m or 12.2mm The yield stress of titanium is 830 MPa (830,000,000 Pa). A titanium rod used for an femur implant needs to withstand 29 kN (29,000 N). What should the diameter of the rod be to not deform? yield stress ((y) = 830 MPa F = 29 kN d = ? d = 0.0067m or 6.7mm Compare the rods from problems 1 and 2. Which rod can be smaller? What is the ratio between the steel rod diameter to the titanium rod diameter? The titanium rod can be smaller than the steel rod. The titanium rod can be almost half the size of the steel rod and still withstand the same force without deforming. The yield stress of steel is 250 MPa (250,000,000 Pa). A steel rod has a diameter of 13 mm (0.013 m). What is the maximum force that the rod can withstand? yield stress ((y) = 250 MPa d = 13 mm F = ? F = 33183N or 33.2kN The yield stress of titanium is 830 MPa (830,000,000 Pa). A titanium rod has a diameter of 13 mm (0.013 m). What is the maximum force that the rod can withstand? yield stress ((y) = 830 MPa d = 13 mm F = ? F = 110167N or 110.2kN Compare the rods from problems 4 and 5. Which rod can withstand more force? What is the ratio between the titanium rod maximum force to the steel rod maximum force? The titanium rod can withstand more force before permanent deformation than the steel rod.  The titanium rod can withstand more than three times the maximum force before permanent deformation compared to the steel rod. A steel rod that is 5.5 ft long stretched 0.04 in when a 2-kip (2,000 lb) tensile load is applied to it. Knowing that E = 29,000,000 psi, determine (a) th