多传感器电流测量系统信号处理算法研究.pdfVIP

25 卷 22 期 中 国 电 机 工 程 学 报 Vol.25 No.22 Nov. 2005 2005 年11 月 Proceedings of the CSEE 2005 Chin.Soc.for Elec.Eng. 文章编号：0258-8013 （2005 ）22-0130-06 中图分类号：TM933 文献标识码：A 学科分类号：47040 多传感器电流测量系统信号处理算法研究 敬, 耿英三, 姚建军, 王建华 （电力设备电气绝缘国家重点实验室（西安交通大学）陕西省 西安市 710049 ） INVESTIGATION ON THE SIGNAL PROCESSING ALGORITHMS APPLIED IN THE MULTI-SENSOR SYSTEM MEASURING ELECTRIC CURRENT WANG Jing, GENG Ying-san, YAO Jian-jun, WANG Jian-hua (State Key Laboratory of Electrical Insulation and Power Equipment （Xi ’an Jiaotong University），Xi ’an 710049，Shaanxi Province,China) ABSTRACT: It has been proposed to measure electric current 1 引言 in a non-contact way through processing the outputs of the 电力系统中传统的电流测量方法包括互感器 magnetic sensors around the current flowing conductors. Signal processing algorithm is one of the key issues because it’s 法、霍尔电流传感器法等，存在种种弊端。例如体 capable of reducing the impact of the interference magnetic 积大，线性范围有限，频率响应低等。近年来，基 field and the uncertainty of the positions of the magnetic 于新型测量原理的电流测量方法得到了广泛的关 sensors on the measurement error. In this paper, three signal 注，例如罗氏线圈电流测量法，光电式电流传感器 processing algorithms, including averaging approach, spatial [1-7] 等。但是仍然面临各种实用性问 需要解决 。根 Fourier transform and optimal Kalman filtering, are presented 据载流导线空间感应电磁场分布，可以通过磁传感 respectively. The approaches are investigated through their 器测量电磁场分布，实现非接触式电流测量。由于