泡沫金属作为毛细层的风冷型平板环路热管传热性能的研究.pdfVIP

第32 卷 第32 期 中 国 电 机 工 程 学 报 Vol.32 No.32 Nov.15, 2012 58 2012 年11 月15 日 Proceedings of the CSEE ©2012 Chin.Soc.for Elec.Eng. 文章编号：0258-8013 (2012) 32-0058-06 中图分类号：TK 124 文献标志码：A 学科分类号：470·10 泡沫金属作为毛细层的风冷型平板环路热管 传热性能研究 薛强，纪献兵，Abanda Aime Marthial ，徐进良 (新能源电力系统国家重点实验室(华北电力大学) ，北京市 昌平区 102206) Heat Transfer Performance of Air Cooling Type Loop Heat Pipe With Compressed Foam Metal as Capillary Layers XUE Qiang, JI Xianbing, Abanda Aime Marthial, XU Jinliang (State Key Laboratory of Alternate Electrical Power System with Renewable Energy Sources, North China Electric Power University, Changping District, Beijing 102206, China) ABSTRACT: A loop heat pipe (LHP) was studied with water 关键词：泡沫金属；多孔毛细层；风冷；环路热管；传热 as the working fluid. The final heat sink was cooled by air. The 0 引言 LHP evaporator consisted of an intercrossed microchannel structure contacted with compressed copper foam piece. Effects 随着近几年高热流密度高功率仪器的发展，热 of heating power, inclination angle and liquid charge ratio on 能的高效输运越来越受到人们的重视，基于热管两 the thermal performance of LHP were investigated 相流动传热的高效性，使它在电脑CPU、大功率发 experimentally. The temperature distribution in each 光二极管(light emitting diode，LED)灯、半导体元 component of LHP and the thermal performance data were 件、电子管以及集成电路板等方面得到了广泛的应 obtained. The results demonstrate that the optimal thermal performance of the LHP is reached at the liquid charge ratio of 用。现代产品具有热流密度高、体积小、高温失效 50% and the inclin