AC电源线Power Cords资料.pptVIP

Fittings--防倒插 使用在连接2极2线的平行结构或标准的2极3线带接地结构应防止相配公插的不正当插入, 地端的不正当插入,或两者连接时插入带电部件. Cord Sets and Power-Supply Cords(UL 817) length measurement: 1.cord set 和detachable power supply cord的长度应算到两端的本体(但不包括插头的外露端子或电流抽头, 也不包括不可拆式插头的螺纹座). 2.不可拆卸电源供应线的总长从插头的端面算到另一端的外被. Cord Sets and Power-Supply Cords(UL 817) Cord Sets and Power-Supply Cords(UL 817) 识别和配线Identification and Wiring 1.白色或灰色 接“W” (表示接地动力导体(中线)),或连接到“X”,“Y”或“Z”或没有指定任何字母的连接. 2.绿色带或不带黄色条纹的应只能连接到插图中指定的“G”字母(表示接地导体) 对照表: Rating cord set的电压等级由输入装置决定,并不超过软线或开关(如有),以最小为准. The voltage rating of the cord set shall be determined by the voltage rating of the line-fitting configuration and shall not exceed that of the flexible cord or switch (if provided), whichever is less. cord set的安培等级由连接插头,软线或开关(如有),以最小为准. The cord-set ampere rating is to be determined by the ampere rating of the attachment plug, flexible cord, or switch (if provided), whichever is less. Cord Sets and Power-Supply Cords(UL 817) Marking 每个延长线和电源供应线应明显的标识出制造商的名称或商标,以及生产地,产品编号或类似东西. 如制造或装配延长线和电源供应线在超过一个以上工厂进行,每个成品应不同的标识,可使用代码,它能鉴别产品由哪个详细的工厂生产. Cord Sets and Power-Supply Cords TEST Attachment Plug Test UL817/81 Conductor Secureness Test(20lbf,1min) UL817/82 Security of Blades Test(20lbf,2min) UL817/83 Security of Insulation Test(15lbf,2min) UL817/84 Strain Relief Test(30lbf,1min) UL817/87 Temperation Test(max.30℃ raise) UL817/88 Dielectric Voltage Withstand Tests(1250) UL817/89 Insulation Resistance Test UL817/90 Accelerated Aging Tests(96H,100℃) UL817/94 Attachment Plug Grip Test UL817/95 Blade Pull Test at　Elevated Temperature UL817/96 Flexing Test(2500 cycles) UL817/99 Abrupt Pull Test UL817/100 Jacket Retention Test UL817/60.2 Adhesion Test Cord Connector Test UL817/81 Conductor Secureness Test(20lbf,1min) UL817/83 Security of Insulation Test(15lbf,2min) UL817/84 Strain Relief Test(30lbf,1min) UL817/88 Dielectric Voltage Withstand Tests(1250) UL817/89 Insulation Resistance Test UL817/90 Accelerated Aging Tests(96H,100℃) U