- 5
- 0
- 约6.29万字
- 约 71页
- 2016-06-08 发布于贵州
- 举报
摘要
本设计的主要任务是苏州市吴越写字楼建筑给水排水工程设计,设计的主要内容包括:建筑给水系统、建筑排水系统、建筑雨水系统、消火栓给水系统和自动喷淋系统的设计。
本建筑地下2层,地上19层,建筑物总高度为71.8m。其中一、二层为营业厅;三至十九层为大空间办公。
市政给水管网常年提供的资用水头为0.40MPa ,经技术经济比较,室内给水系统拟采用分区给水方式。初步拟定该建筑给水系统分二区:一至八层为低区,由市政管网直接供水;九层至设备层为高区,由直联无负压给水设备供水。
建筑排水系统采用合流制,所有的污废水经化粪池处理后排入下水道。
建筑雨水系统采用内排水的排水方式。
消火栓给水系统分为室内消火栓给水系统和室外消火栓给水系统,消火栓的布置范围包括各楼层、消防电梯前室和屋顶检验用。消火栓保护半径为23m。
建筑内喷头数量约1865个,设3组湿式报警阀,报警阀后管网为枝状网,每层设水流指示器。
关键词:建筑给水系统,排水系统,消火栓系统,自动喷淋系统
Abstract
The main task of this design is the water supply and drainage design of wuyue office building in SuZhou. The content of my design includes the design of the building water supply system, the building water drainage system, the building storm-water system, the hydrant water supply system and the automatic sprinkler system.
The building has 2 floors underground and 24 floors overground. The height of the building is 71.8m.The first~the second floor are used for business. The third floor~the 19th floor are used as the big space office.
The municipal water supply piping can provide 0.40Mpa head. After the comparison of technicality and economy, interior water supply system intends to adopt subarea water supply. Preliminary study out that building water supply system is divided two areas: 1~8 floors are low area. The pipe network supplies water directly from municipal water supply piping;9~equipment floors are high area. Water supply is supplied by no negative pressure water equipment.
The building water sewerage system adopt confluence .All waste water enter drain via a septic-tank.
The building storm-water system adopts inner draining.
Hydrant water supply system includes interior hydrant water supply system and outside hydrant water supply system. Hydrant arranging range includes every storey, the room in front of fire elevator and roof for check. The hydrant protects a radius of 23m.
The number of sprinkler heads in the building is about 1865. The automatic sprinkler system set up 3 groups watery alarm valve. Behind the alarm valve, th
您可能关注的文档
- 门禁系统-PR2200.doc
- 密码锁论文(最另).doc
- 绵竹市人民医院程投标施工组织设计(南通三建).doc
- 民乐县第三中学房检测鉴定报告.doc
- 民五区间施工组设计(顾).doc
- 民用户抄表员岗汇编.doc
- 鸣鹤——上林湖景名胜区总体规划.doc
- 模板高支撑架方(10.20)改.doc
- 模板支架系统施方案修订版.doc
- 模电基础知识教.doc
- 银行业上市银行春季调研反馈暨板块思考:2026年银行业选股为先,α优于β.pdf
- 银行业如何看待开年“存贷错位”.pdf
- 宣贯培训(2026年)《GBT 26127-2010车用压缩煤层气》.pptx
- 培育全员安全意识的实践路径.pptx
- 宣贯培训(2026年)《GBT 26128-2010稀缺、特殊煤炭资源的划分与利用》.pptx
- 宣贯培训(2026年)《GBT 26113-2010 微机电系统(MEMS)技术 微几何量评定总则》长文.pptx
- 宣贯培训(2026年)《GBT 26137-2010高炉煤气能量回收透平膨胀机热力性能试验》.pptx
- 政务信息化标准体系的建设与运行评估.docx
- 心理咨询基础理论与技巧培训.pptx
- 宣贯培训(2026年)《GBT 26141.1-2010无损检测 射线照相底片数字化系统的质量鉴定 第一1部分:定义、像质参数的定量测量、标准参考底片和定性控制》.pptx
原创力文档

文档评论(0)