多功能标线仪后盖模具设计及其型腔仿真加工机械CAD图纸.doc

多功能标线仪后盖模具设计及其型腔仿真加工 摘要：本课题任务是多功能标线仪后盖模具设计及其型腔仿真加工。根据注塑机注塑能力以及塑件的结构和成型要求，采用一模二腔进行成型制造，保证塑件精度的同时提高生产率，降低成本。考虑到塑件的实际结构和成型要求 Instrument queen cover design for die and mould and their type cavity emulation processes the multifunctional graticule Abstract : This topic duty is the multi-purpose graticule meter top plate mold design and its the cavity simulation processing.Produce plastic articles by injection moulding according to the injection machine as well as the ability moulding the piece of structure and molding request , adopt one model two cavities carry out molding fabrication, to ensure that simultaneous moulding document accuracy improves efficacy , cost reduction. Choose the outer surface of the goods as the parting plane to make goods demold successfully. The spruce uses the cold-slug well with Z type pulling rod to pull the spruce solidified materials when ejecting. For guarantee products surface mass,adopt to hide the dyadic running gate , diffluence saying that the style designing that being adopting balances symmetry scatters.Suspension and Positioning mechanism use matched guide pillar and guide sleeve to make movable mould ,fixed mould to work accurately. Using cavity-cycle distribution channel for the cooling uniformity, quickly. Thinking that structure and molding demand to the reality moulding a document, adopt side direction takes core organization out , uses the form drawing out a bayonet smoothly. Rationality by the fact that every is composed of the part solid modeling and the physical design assembling , checking a mould to the mould. Carry out industrial analysis on mould type cavity , adopt the Mastercam software to carry out type cavity emulation treating: The physical design choosing the cavity processing way , processing a cutter , setting up processing a parameter , calculating NC cutter route and entity cutting simulating result and so on , checking and proofreading a type , Processing manufacture rationality.