本部总结及201年工作总体思路1.docVIP

2010年新疆雪峰公司乌鲁木齐市分公司工作总结及2011年工作总体思路 2010年，带领广大员工励志图强、攻坚克难，职工积极主动地开展工作，完成了的指标。生产经营情况及产品质量、成本费用、财务预算等指标的控制情况 一、202010年，是这一年挑战。紧紧围绕核心指标强化安全管理杜绝和控制安全风险加快项目建设?? （一）1、生产情况： （1）2010年1月至10月完成生产指标：生产乳化炸药吨，完成计划％完成炸药吨，完成计划％完成生产，完成生产乳化炸药吨，完成计划％完成炸药吨，完成计划％完成生产，生产负伤率，低于作与项目完成情况。2011年工作指导思想：公司积极响行业发展要求进一步按照行业技术进步指导意见，加快技术步伐，提高技术创新能力，强化安全生产管理，实现安全发展、清洁发展、快速发高度重视安全生产，不断提高员工的安全意识，同时要保障安全投入持续抓好现场管理技术人才的培养和引进；要加强安全管理，及时排查治理安全隐患，防范经营风险；以技改为重点，调整产品结构，保障效益增收? （三）要以稳定为根本，提高本质管理，创建和谐要管理，抓好现场管理，抓好定置管理抓好人力资源管理抓好作业人员的培训教育 of support and hanger. Cable hole plugging gaps should use qualified fireproof materials, block surface should have sufficient strength, surface appearance. When cables pass through the firewall, of lax structure of local fire safety clamps. Thermoplastics production, to comply with the process, no bubbles in the thermoplastics pipes, linear nose consistent with the core wire specifications, contact is good, no cracks, break. Tinned copper nose clean solder full exterior surface is smooth without burrs. Control cable Assembly should be fastened, dense, solid, clean, and beautiful. Secondary wiring the cable terminations should be arranged by the actual location of the device line cards, the wiring from the upper to the lower, from left to right in the order. Fixed to maintain consistent spacing between lines, flat, should be around the corner in the same location, same shape, to ensure that the wiring process neater and more elegant. 5 thermal process control measures for quality problems 5.1 control thermal duct system leakage measure to ensure that the use of electric door and actuator installation quality and equipment to the site to check its seal, acceptance, in order to fundamentally solve oil spill problems. Plant for local Panel after installation, in conjunction with the quality Department to check its overall quality, poor-quality parts replacement. Supply good quality of purchasing instrument and ovality of the guarantee instrument tubes as small as possible, selec